2019 SUNLU S8 3D Printer Upgrade V1.15 Silent Mainboard with 310 x 310 x 400mm Build Volume
Nozzle QTY：Single Nozzle
Nozzle Diameter：Equipped with 0.4mm、0.3mm & 0.2mm (Optional)
Print Speed：20-100mm/s(Recommended: 50mm/s)
Recommended Filament：1.75mm PLA, ABS, PETG, HIPS,WOOD, PLA Carbon Fiber
Nozzle Max Temp：260℃
Input Format：STL .OBJ .AMF
Power Parameter：115V/230V AC,50/60HZ
1.Built-in motherboard power supply: According to the circuit design, device specifications and heat dissipation, the wires are concentrated in the machine for independent control.
2.The printing is more stable: the double Y-axis motion control system drives the high-quality stable output of the two-side synchronous belt, effectively avoiding the shock caused by printing.
3.Design: The body is simple and generous, enhance the creative space of printing.
4.Power failure continued: Automatically store the print record after power off, continue printing after power-on, and improve the model print success rate.
5.Broken material detection: When the consumables are exhausted, disconnected, or other abnormal conditions occur, the printing will be automatically suspended, and printing will continue after the consumables are accessed.
6.Easy leveling method: The large hand-turning nut is ergonomically designed, the leveling speed is fast, and it is free from time-consuming and labor-intensive problems.
7.Industrial grade circuit board: After high load safety.
- 【S8 3D PRINTER WITH LARGE PRINT AREA】 With a generous print volume (310x310x400mm), S8 offers amazing print quality, making it one of the best 3D printers for professional use. S8 is incredibly reliable when it comes to producing 3D models, and the accuracy of the 3D replications is incredibly impressive. If you need a 3D printer that can reliably reproduce many 3D objects accurately, SUNLU S8 is a fantastic choice.
- 【MUCH STABLE PRINTING】 There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System, S8 greatly increase its printing stability, also, the built-in branded power supply ensure stable and sufficient power. Spend more time making without having to manually adjust the print bed.
- 【QUICK INSTALLATION】 When it arrives on your doorstep, the S8 3D Printer comes 95% pre-assembled, which makes installation easy as can be. Additionally, the heated bed can heat up to 80C in 2 minutes and it only takes the 0.4mm nozzle about five minutes to heat up to 110°C. With the glass-smooth headed surface, it makes all types of filaments can be easily stick on.
- 【FILAMENT RUN-OUT+ POWER LOSS DETECTION & RECOVERY】 Have you ever tripped over the power cord and lost a long hours print? S8 will save you from the loss of power. When it recovers from a power failure, the machine will continue to print. Also, it will automatically pause your 3D print and notifies you when you’ve run out of filament, saving you time and money.
- 【SUNLU S8 QUality GUARANTEE】 Buy straight from the manufacturer to receive the 1-year limited manufacturer’s warranty on your new 3D printer. With high customer satisfaction and excellent technical support. We are ready to help you. (Contact Us: Your Amazon Buyer Account > Click Your Account > Your Orders > Find your order and click Contact Seller)
Click Here For More Information
CZ-300 (CZ Generation) EASY INSTALLATION & OPERATION Designed with functionality and usability in mind. LARGE BUILD SIZE We understand your basic 3D printing need of having a large build volume. Our CZ-300 printer provides a build area of 300x300x300mm (11.8×11.8×11.8 inches) for you getting started. NEW NOZZLE DESIGN The selected 0.4 mm nozzle is made of copper that came withthe hotend supporting max temperature up to 260 °C. Its feature delivers good printing quality of this DIY 3D printer. HEATED PRINT BED & CONSTANT TEMPERATURE CONTROL Our CZ-300 printer is installed a heated print bed that can be setup with the consistent printing temperature from 40 to 90°C. Its feature serves variety of filament materials to fulfil your printing needs. LCM GRAPHICAL INTERFACE The control box uses 3″LCM adopted the graphical interface optimization for friendly usage. SUPPORTED MULTIPLE FILAMENTS PLA, ABS, PETG, Carbon Fiber PLA, Metallic PLA etc.(includes third-party filaments) PRODUCT SAFETY CERTIFICATION The product has CE, LVD, and FCC safety certification to keep safe in use.
- LARGE BUILD SIZE (300x300x300mm) – Crazy3dprint CZ-300 printer provides a build area of 300x300x300mm (11.8×11.8×11.8 inches) for you getting started.
- Cura Support (PC & Mac) – The templates can be downloaded from Crazy3dprint.com
- HEATED PRINT BED & CONSTANT TEMPERATURE CONTROL – Crazy3dprint CZ-300 printer is installed a heated print bed that can be setup with the consistent printing temperature from 40 to 90°C. Its feature serves variety of filament materials to fulfill your printing needs.
- NEW NOZZLE DESIGN – The selected 0.4 mm nozzle is made of copper that came with the hot-end supporting max temperature up to 260 °C. Its feature delivers good printing quality of this DIY 3D printer.
- Techradar 4.5 stars review & 3″ LCD GRAPHICAL INTERFACE – Crazy3dprint CZ-300 is rated 4.5 stars out of 5 on Techradar review 2020
Click Here If You Need More Detailed Info…
All dimensions are measured manually and there may be small deviations.
The color may have different as the difference display, Please understand.
1 x Lead Screw
1 x Nut
Our aim is to provide Top Level Customer Service, please feel free to contact us
so that we can try our best to solve any problem. Thank you very much!
- Package Content:1 x Lead Screw;1 x Nut
- Product Name:T8 Z Axis Lead Screw
- Total Size:M8x300mm/0.32″x11.8″(D*L)
- Used in 3D printers
Detailed Information available on our Homepage…
If you are an experienced 3D printing enthusiast looking for an upgrade, look no further. CR-X’s dual extrusion system gives you more printing capabilities than you will ever need. It also has a tempered glass heated bed with a nano-technology (Carboloy) print surface, which makes both adhesion and part removal easier for the user. This printer will meet all your 3D printing needs and beat all your expectations in every way.
WHY CHOOSE SAINSMART?
As an industry leader since 2010, SainSmart offers a 1-year manufacturer’s warranty on 3D printers, so you can rest assured that your purchase is protected. Contact us for professional solutions or recommendations and expect a qualified response within one business day. Buy with confidence!
Printing Technology: FDM (Fused Deposition Molding)
Number of Nozzles: 1
Print Area: 300 x 300 x 400mm (11.8 x 11.8 x 15.8”); Dual-extruder: 270 x 270 x 400mm (10.6 x 10.6 x 15.8’’)
Print Speed: 100 mm/s
Layer Thickness: 0.05mm to 0.4mm
Nozzle Diameter: 0.4mm, compatible 0.2mm and 0.3mm
Compatible Filaments: 1.75mm PLA, PETG
Heated Bed Temperature: 100°C(212℉)
Mode of Operation: Connected to a PC or Offline with SD card<
Compatible Formats: stl, obj, amf
Compatible Software: Cura, Repetier-Host, Simplify3D
Power Supply: AC Input 110-220V; DC Output 24V 480W
1 x CR-X 3D Printer
1 x Assembly Tools Box
1 x Screw Accessories Box
2 x 1KG PLA Filament
- Integrated Design: The all-in-one base provides the frame for the CR-X while also housing the printer board and power supply for a compact and efficient printer!
- Dual Extruder: Single nozzle, Dual Extrusion. CR-X comes with a new print head design that channels two filament feeds through a single nozzle. A purge tower will be built to clear the residue in each extruder during filaments switching.
- Carboloy Silicon Printing Platform: The Carboloy silicone coated printing platform provides a strong first layer adhesion when temperatures in the print bed reach 60°C! Allowing for easier printing and removal!
- Stable Printing: The bottom slide block has 8 pulleys, and the bottom profile is relatively solid. This unique design allows the entire machine to run smoothly when printing.
- Three Fans Cooling: Better and faster cooling with more efficient radiating. Three fans to help cool the extruded filament and improve consistency in layering.
Click Here For More Information