Aokin 5Pcs 3D Printer Dual Z Stepper Motor Parallel Module with 100mm Cables,for Dual Double Z Axis Dual Z Stepping Motors, for Reprap Prusa Lerdge 3D Printer Board 3D Printer Parts and Accessories

Feature:
Name: 3D Printer Dual Z Stepper Motor Parallel Module
Size: 25mm*15mm
Cable Length: 100cm

Package :
5pcs Dual z stepper motor parallel modules
5pcs Cables

Product Features

  • Design – New Dual Z Stepper Motor Adapter Parallel Module Diverter Expanding Flow Board Diffuser Splitter.
  • Application – Special designed for 3D printer stepper motor-side parallel, a driver drives two motors, put them in-line (series) with the motor.
  • Module Size – 25mm*15mm; Cable Length: 100mm; Weight: 5g,Comes with a 4 pin cable (4 inch), easy to connect.
  • Note – Only for mini printers or small current motors in parallel (with the same motor in parallel, the current are divided evenly).
  • Pakage List – 5pcs dual z stepper motor parallel modules and 5pcs cables, easy to operate.

Visit The Website For More Information…

STEPPERONLINE 5PCS Nema 17 Stepper Motor 1.5A 12V 45Ncm (63.74oz.in) 4-Lead 39mm Body W/ 1m Cable and Connector for DIY CNC/ 3D Printer/Extruder

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm (63.74oz.in).

Electrical Specification

*Manufacturer Part Number: 17HS15-1504S-X1
*Motor Type: Bipolar Stepper
*Step Angle: 1.8 deg
*Holding Torque: 45Ncm(63.74oz.in)
*Rated Current/phase: 1.50A
*Phase Resistance: 2.3ohms
*Inductance: 4.4mH ± 20%(1KHz)

Physical Specification
*Frame Size: 42 x 42mm
*Body Length: 39mm
*Shaft Diameter: Φ5mm
*Shaft Length: 24mm
*D-cut Length: 15mm
*Number of Leads: 4
*Lead Length: 1000mm
*Weight: 280g

Connection

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Product Features

  • 5 PCS, High torque Low noise
  • Nema 17 stepper motor with step angle 1.8deg
  • Holding Torque: 45Ncm(63.74oz.in), 12-24 VDC
  • Rated Current/phase: 1.50A & Phase Resistance: 2.3ohms
  • Build with 1m Pin Connector

Visit The Website For More Information…

BZ 3D A4988 Stepstick Stepper Motor Driver Module  with Heat Sink for 3D Printer Controller Ramps 1.4 MKS Gen L SKR V1.3 Board for 3D Printer Part(Pack of 5pcs)

-Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) 
-Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection 
-Automatic current decay mode detection / selection 
-Internal UVLO
  -Mixed with slow current decay modes 
-Synchronous rectification for low power dissipation 
-Crossover-current protection 
-Thermal shutdown circuitry 
-3.3 and 5 V compatible logic supply 
-Thermal shutdown circuitry 
-Ground Fault Circuit 
-Load short-circuit protection 
-Of five optional step mode: full, 1/2, 1/4, 1/8 and 1/16

Chip upgrade Using the latest high-quality chips, higher compatibility and better conductivity.(It is believed that only high quality products can ensure the quality of your work and bring safety to your work.)

Product Features

  • Compared with ordinary A4988, our high quality A4988 drive production process is improved again by PCB gold plate process (gold-plated pin) SMT placement machine manufacturing, non-manual welding, higher yield and more stable performance.
  • Performance upgrade: PCB covering copper process upgrade to 2oz (our high-quality copper thickness 70um, ordinary 35um), higher copper content, better heat dissipation performance.
  • Under 2A current, it can work for a long time. It is very suitable for 3D Printer, Mendel, Huxley and other machines.
  • Using the latest chips, higher compatibility and better conductivity
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage toachieve higher step rates.

Visit The Website For More Information…

Luxnwatts Creality Ender-3X 3D Printer Ender 3 Upgrade with Tempered Glass 5PCS Nozzle with Resume Printing Function for School

Package List:
Ender-3X 3D Printer * 1
Glass plate * 1
Nozzle * 5

Glass Plate Use Method:

1.Put the glass plate on the hot bed, fixed via included four clips.
2.Place an A4 paper on the glass plate for bed leveling. The distance between the nozzle and the glass plate keeps the A4 paper moving freely.
3.Clean the glass plate surface with alcohol/water, if there is sweat or oil on the platform. You can add some glue on the glass plate before printing.
4.Suggested bed temperature may vary depending on the filament material.
5.After finish printing, the viscosity of the platform will gradually decrease as the temperature decreases, and the model can be taken after the temperature of the platform is lowered.

Description:

Modeling Technology: FDM (Fused Deposition Modeling)
Printing Size: 220*220*250mm
Machine Size: 440*410*465mm
Gross weight: 8.6kg
Max Traveling Speed: 180mm/s
Filament: 1.75mm PLA
Input: AC 100-265V 50-60Hz
Output: DC 24V 15A 360W
Layer Thickness: 0.1-0.4mm
Nozzle diameter: 0.4mm
Precision: 0.1mm
File Format: STL,OBJ,G-Code
Working Mode: Online or SD offline
Max Nozzle Temperature: 255℃
Max Hot bed Temperature: 110℃
Resume print after power off: Yes.

Temperature settings for different filaments:
PLA: 50-70℃
Flexible filament: 50-70℃
ABS: 100-125℃ (110℃ is recommended)
PC: 100-130℃ (120℃ is recommended)

Product Features

  • Ender 3X Version: Add a tempered glass on the heated bed, which makes models are easier removed. It also makes the hot bed more flat
  • Advanced Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-Slot with POM wheels make it move noiseless, smoothly and durable.
  • Easy and Qucik Assembly: Ender 3X comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well
  • Safety protected power supply; Only needs 5 minutes for hot bed to reach 110℃.
  • Strict Test: Strict testing for key components before delivery and life-time technical supports. Five more free nozzles included.

Click Here If You Need More Detailed Info…