The endstop Limit Switches kit fits for Anet A8 Plus 3D printer.
The package includes 3pcs limit switches(2pin), one of one with pulley and the other two without pulley; 3pcs cables, 750mm(1pcs) and 500mm(2pcs).
Triggering is sensitive, repeat positioning is in high accuracy, with a longer service life.
Small size, easy installation, just plug and play.
100% brand new and high quality, perfect 3D printer parts.
Suitable: For Anet A8 Plus 3D Printer
Cable Length: 750mm, 2pin(1pcs); 500mm, 2pin(2pcs)
Package Size: 9 * 8 * 2.5cm / 3.5 * 3.1 * 1in
Package Weight: 23g / 0.8oz
1 * X Limit Switch Cable
1 * Y Limit Switch Cable
1 * Z Limit Switch Cable
2 * Limit Switch
1 * Limit Switch with Pulley
- The endstop Limit Switches kit fits for Anet A8 Plus 3D printer.
- The package includes 3pcs limit switches(2pin), one of one with pulley and the other two without pulley; 3pcs cables, 750mm(1pcs) and 500mm(2pcs).
- Triggering is sensitive, repeat positioning is in high accuracy, with a longer service life.
- Small size, easy installation, just plug and play.
- 100% brand new and high quality, perfect 3D printer parts.
Visit The Website For More Information…
- [3D PRINTERS COVER SIZE] – With large size 30″L x28″W x 36″H;It applies to most of the assembled desktop large 3D printers, The printers Cover is made of black 240D oxford cloth which has waterproof and Perfect dustproof . It can effectively prevent the machine from being attacked by water and oil stains.Measure the actual size of the 3D printer before purchasing ,Select the appropriate 3D Printer Protective Cover.
- [PROTECT YOUR 3D PRINTERS] – Guard your valuable Assembled Desktop 3D Printers, scratches and cat hair, prevent dust bunnies from getting into the cabin, keep your 3D printers always ready to use. Also extending its good looks and working life
- [TONS OF STORAGE] – Generous sized pockets is great for storing tool, the manual, spatulas and flat attachments.
- [EASY TO CLEAN] – You can wipe with a damp cloth to clean the dust. It can also be machine washed to wash away dust, water and oil stains
- [SATISFACTION] – Our goal is to make you feel safe and secure. Please feel free to contact us if you have any questions, we will respond within 24 hours.
Detailed Information available on our Homepage…
Technical Specification: Layer Resolution:0.1mm Frame:Aluminum Extrusion XYZ Positioning Accuracy:0.05mm, 0.05mm, 0.1mm Printing Filament : PLA, ABS, TPU, Flexible Materials Filament Diameter: 1.75mm Nozzle Diameter: 0.4mm Machine Dimensions: 430 x 390 x 590 mm (with spool holder),16.9 x 15.35 x 23.2 in (with spool holder) Shipping Box Dimensions: 540 x 440 x 320 mm,21.25 x 17.32 x 12.59 in Machine Weight: 8.9kg Shipping Weight:10.5kg Maximum Print Speed:150 mm/s Maximum Travel Speed:250mm/s Build Volume:220 x 220 x 250 mm,8.66 x 8.66 x 9.84 in Extruder Type: Titan Extruder (Direct Drive) Maximum Build Plate Temperature:130C Power Requirement: 110V – 240V 600W max (with heated bed turned on) Connectivity: USB, TF Card, USB Stick Control Board:MKS Gen L Nozzle Type: Volcano Special Feature: Exclusive Ultra-Quiet Stepper Driver Synchronized Dual Z System Direct Drive Extruder,Filament Runout Detection and Recovery Power Loss Detection and Recovery Rapid Heating AC Heat Bed Touch Screen Control
- ·MUCH STABLE PRINTING: There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System,Genius greatly increase its printing stability, also, the built in branded power supply ensure stable and sufficient power. Spend more time making without having to manually adjust the print bed.
- ·RUNAWAY PROTECTION HEATBED: The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. Additionally, the heated bed can heat up to 80C in 2 minutes and it only takes the 0.4mm nozzle about five minutes to heat up to 110°C. With the Lattice glass smooth headbed surface, it makes all types of filaments can be easily stick on.
- ·.FILAMENT RUN-OUT+ POWER LOSS DETECTION & RECOVERY: Have you ever tripped over the power cord and lost a long hours print? Genius will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically pauses your 3D print and notifies you when you’ve run out of filament, saving you time and money
- ·FAST AND PRECISE: The print speed can reach up to 150 mm/s, .Genius makes high quality print, especially for flexible filament. When it arrives on your doorstep,Genius comes 98% pre-assembled, which makes installation easy as can be.
- ·QUIET TO USE: With a 200 x 200 x 250 mm build volume, the Genius 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive ultra-quiet stepper drivers which significantly reduce the noise level. Genius overhauled the motion system on the Z, replacing the leadscrews with a belt-driven system, which not only reduces the noise level but also allows for faster print speeds. Feel free to work on other things while the machine is printing beside you.
Click Here For More Information
CTC- A8-W5 Wood Upgrade Prusa I3 3D Printer
Printing specifications: Print technology: FFF / FDM
Layer resolution: 0.1-0.4MM
Positioning accuracy: 0.1-0.4MM Filament
diameter: 1.75MM Nozzle
diameter: 0.4MM (Custom options: 0.5 / 0.3 / 0.2MM)
Filament type: ABS / PLA / Flexible PLA
Operating system: OS XP / Vista / Win7 / Win8 / Win10 / Linux
3D AC printing software: Repetier-Host
Data format : STL, G-Code
Maximum temperature of the hot bed: 50-110 ? (adjustable)
Maximum extruder temperature: Recommended: 210 ?, Maximum 250 ?
Power supply: DC 12V / 20A
Output: DC12V / 15A
Connectivity: USB, SD card (stand-alone printing support)
Hot bed material: Alloy
XYZ aluminum Rods: wear resistant, stainless steel
Step motors: 1.8 ° step angle with 1/16 micro-stepping
Physical structure: Reprap
Item weight: 8Kg / 17.6Lbs
Package size: 51 * 31 * 21cm / 20.1 * 12.2 * 8.3in
Package weight: 9.5Kg / 20.9Lbs
1x 3D Printer Kit
1x filament roll (10m)
1x CD DISC (user manual, software, print test files, etc.)
Body Material Alloy
Chassis Material stainless steel
Print Technology FFF (Fused Filament Fabrication)
Layer Thickness 16
Positioning Precision 0.1-0.4MM
Print Jets Single Jet
Filament Diameter 1.75mm
Speed 15mm psp
Connectivity USB, SD card (stand-alone printing support)
Operation System Requirements : OS XP / Vista / Win7 / Win8 / Win10 / Linux 3D AC printing software: Repetier-Host
- ✔ Support the diversity of material. aluminum heating plate and wide temperature allow the printer, with many materials such as ABS, PLA…. etc. to work..
- ✔ Large Print Size: 220 * 220 * 240mm and LCD panel. MK8 nozzle, Cut quickly, high printing precision, good result and easy to load filament, poye the complex construction molding.
- ✔ Quick installation: According to the instructions, you can assemble it quickly.
- ✔ Your operating system for XP, for WIN7, for MacOS, for Solidworks. Printing software: Cure. SD card is supported.
- ✔ Wide application: The equipment can be diffused in office, education digital institution, Family, hospital etc. You can create character movie, children’s toys, quick model design, parts manufacturing, medical model.
Click Here If You Need More Detailed Info…