BIGTREETECH DIRECT BTT SKR Mini E3 V1.2 Control Board + TFT35-E3 V3.0 Touch Screen Compatible TFT35 12864LCD Display WiFi 3D Printer Parts for Creality Ender 3


Introduction:
【BIGTREETECH SKR-mini-E3 】motherboard is the 3D batting of ShenZhen BigTree Technology CO.,LTD
An ultra-silent, low-power, high-quality 3D printer master board launched by the printing team.

Specially for Ender 3 printer to update.

More detailed information about SKR MINI E3 you can visit this website:
https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3

【BIGTREETECH TFT35-E3 V3.0】 is a medium size, dual-mode, ultra-clear 3D printing machine display launched by the 3D printing
team of Shenzhen BIGTREE Technology CO., LTD., which can perfectly replace the original LCD screen of Ender3 printer.
More detailed information about SKR MINI E3 you can visit this website:
https://github.com/bigtreetech/BTT-TFT35-E3-V3.0

Product Features

  • 【 SKR MINI V1.2】: Perfect upgade of Ender 3 machine motherboard
  • 【 SKR MINI V1.2 Stepper motor】: Integration of TMC2209 UART Mode
  • 【TFT35 E3 V3.0】:Touch Screen compatible 12864LCD Display
  • 【 SKR MINI E3 Firmware】: https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3
  • 【TFT35 E3 V3.0 Firmware】:https://github.com/bigtreetech/BTT-TFT35-E3-V3.0

Visit The Website For More Information…

BIGTREETECH DIRECT 2pcs High Precision V6 Throat Heat with Teflon PTFE Tube Break for E3d V6 Hotend Heater Block 1.75mm 3D Printer Parts & Accessories


Name:V6 Throat Heat with TeflonTube
Size: V6 Bodwen
Material: All metal
Suit for: 1.75mm Filament
Screw Threads: M6
Heat break: Cost-effective

1. Heat Break: cost-effective
2. All metal Heat Break: corrosion-resistant, high temperature resistant, durable,
suitable for high-temperature 3D printing that other throat cannot handle
3. High-Quality Heat Break: Higher Temperature Resistance
4. Production equipment: High-precision imported professional
equipment to better ensure product consistency.
5.Deburring treatment: Four major processes, strict quality assurance. No burrs anti-oxidation and clean surface
6.Our High-quality Heat Break Throat(There are no obvious burrs in the inner hole, and spit out filament is more smooth)

Product Features

  • Size: V6 Bodwen
  • Material:Metal and PTFE
  • Suit for: 1.75mm Filament
  • Screw Threads: M6
  • Heat break: Cost-effective

Visit The Website For More Information…

Sovol Upgraded SV01 3D Printer 95% Pre-Assembled with 5 x 0.4mm Nozzle, Direct Drive Extruder Meanwell Power Supply and Glass Plate Built-in Thermal Runaway Protection 280x240x300mm

Direct Drive Extruder bring you perfect printing experience.Resume pringting and filament detector, thermal runaway protection, large hand-twist gear, Meanwell power and cable management , one piece structure, full metal fream, which make you prior to most other 3D Printer player.

Specification:
Type: SV01
Molding Tech: FDM(Fused Deposition Modeling)
Printing Size: 240*280*300mm
Precision: ±0.1mm
Layer Thickness: 0.1-0.4mm
Nozzle Diameter: 0.4 mm/1.75 mm
Nozzle Temp.: ≤250℃
Bed Temp.: ≤100℃
Working Mode Online or SD Card offline
File Format: STL, OBJ, AMF.
Slice Software: Cura、Simplify3D
Board Version: ATmega2560
Input:AC 115-230v 50-60Hz
Output : DC 24V 350W
Machine Power: 270W
Heat Bed Power: 220W
X/Y/Z-axis Resolution: 0.012mm,0.012mm,0.001mm
Product Weight: 9.8KG

Package List:
1 X SV-01 (Self Assembly)
1 X 250G PLA Filament (Randomly Color)
5 X 0.4mm Nozzle

If you need firmware file, please move to this link and Downlaod Firmware of SV-01 : https://www.dropbox.com/s/vlfo8jnoegd5ski/SOVOLTF1.1.6PowerLossContinueFilamentCheckEnglish20190510.hex?dl=0

Product Warranty
Sovol are devoted to offer premium quality products to all cherished customers. If there are any questions, please feel free to contact us, Sovol Customer Service Team will spare no efforts to assist with you within 24 hours.

Product Features

  • ★ Direct Drive Extruder ★: Sovol SV01 features with direct drive extruder and dual Z lead screw, greatly increase its printing stability and maintains great printing quality even under high-speed printing. SV01 can support multiple material filaments, such as PLA, TPU, ABS and etc.
  • ★ Meanwell Power Supply ★: Built-in branded Meanwell power supply ensures stable and sufficient power, heat up the hotbed and nozzle fast. Certified power supply also can protect your printer from unexpected power surges. SV01 is shipped partially assembled in 3 parts, Headache-Free to complete the whole assembly process. Takes approximately 20 minutes to assemble.
  • ★ Removable Glass Plate ★: This 3D printer comes with a flat glass plate on the regular heated bed, greatly resolving warped bed issues. No matter for small or large model, it can ensure you to get perfect layer lines every time.
  • ★ Semi-Assembled Kits ★: Extra 5 nozzles included. Sovol Direct Drive Extruder 3D Printer comes with several partially assembled kits, just only take you at most 30 minutes to assemble and install. very easy to assemble, easier than Creality Ender 3.
  • ★ Sovol Support ★: All of our products are shipped to the consumer directly from the manufacturer, we provide lifetime technical assistance. Professional customer service has always been a cornerstone of our company philosophy.

Click Here For More Information

BIGTREETECH Direct SKR V1.4 Turbo 32 Bit Control Board with LPC1769-120MHz Frequency 3D Printer Parts VS SKR V1.3 MKS GEN L TMC2130 TMC2209 TMC2208


SKR V1.4 / Turbo https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4

※ ※ SKR motherboard parameters】 :
Appearance size: 110 * 85mm
Mounting size: 102 * 76mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-15A
Logic voltage: DC 3.3V
WIFI module: ESP-01S
motor driver: support TMC5161, TMC5160, TMC2209, TMC2225, TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988 etc., independent external motor drive.
Support of the driver work mode: SPI, UART, STEP / DIR
Motor driver interface : X 、 Y 、 Z 、 E0 、 E1,5-ways (Each interface has a closed control interface) with up to 256 subdivisions
Temperature sensor interface: TH0, TH1, TB, 3-channel 100K NTC temperature touch and neopixel.
2) Equipped with highly modular and open source firmware Marlin2.0, which is suitable for users for DIY and secondary developers;
3) Additional fan interfaces: 1-way CNC fan, 3-way normally open fan;
4) support 2.4, 2.8, 3.5 inch color touch screen, support LCD2004 screen, LCD12864 screen screen
5) Update and configure the firmware via an SD card which is easy , convenient and efficient.
6) The thermistor interface is protected by an overpressure resistor with a bile capacitor to increase the resistance of the interface. ;
7) Supports continued printing when turning off, detection of thread breaks, automatic shutdown after printing, etc. ;
8) High-performance MOSFET tube, better heat dissipation;
9) The closed-loop drive interface is reserved to reduce the problems of the pluggable switching module. ;

Product Features

  • √ 1. 【Main Control Chip】 Performance has been significantly improved with the LPC1768 series Cortex-M3 main control chip with 32-bit main frequency and 120 MHz ARM level
  • √2. 【Power:】 Using dedicated M6130 power chip, support 12-24V power input;
  • √3. 【Work mode】 The SPI and UART work mode controlled by the TMC driver, which also has the DIAG pin, which eliminates the need for a complex wiring process and can be used by simply pulling the jumper cap off.
  • √4. 【Double Z-axis :】 Double Z-axis interface, which eliminates problems with the external drive expansion module;
  • √ 5. SKR V1.4 / Turbo】 https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4

Visit The Website For More Information…